Preliminary

Oral Report

1. THz waveguides: properties and applications
   M.V. Davidovich
2. THz plasmon amplification by optical pumping and electron beam
   M.V. Davidovich, Saratov State University
3. Diffraction of plane electromagnetic wave on structures with graphene.
   K.A. Sayapin, Saratov State University, M.V. Davidovich, Saratov State University
4. Suppressing of parasitic oscillation in a multimode gyrotron by external signal or by reflection
   Natalia V. Grigorieva, Maria M. Melnikova, Arina A. Rodina, Andrey G. Rozhnev, Nikita M. Ryskin (Kotelnikov Institute of Radio-Engineering and Electronics RAS, Saratov Branch & Saratov State University)
5. Studies on sub-THz traveling-wave tubes with a multiple sheet electron beam
   Nikita M. Ryskin, Roman A. Torgashov, Vladimir N. Titov, Andrey E. Ploskih, Andrey V. Starodubov, Andrey G. Rozhnev Saratov Branch, Institute of Radio Engineering and Electronics RAS, 38 Zelenaya Street Saratov, 410019 Russia & Saratov State University, Saratov, 410012 Russia Gennadiy V. Torgashov Saratov Branch, Institute of Radio Engineering and Electronics RAS, 38 Zelenaya Street Saratov, 410019 Russia Igor A. Navotskiy, Valeriy V. Emelianov RPE “Almaz,” Saratov, 410033 Russia
6. On the technological approach to microfabrication of a meander-line slow-wave structure for millimeter-band traveling-wave tubes with multiple sheet electron beams
   Andrei Starodubov, 1) Saratov Branch, V.A. Kotel’nikov Institute of Radio Engineering and Electronics RAS; 2) Saratov State University Vladislav Atkin, Saratov State University Igor Navrotsky, 1) Saratov Branch, V.A. Kotel’nikov Institute of Radio Engineering and Electronics RAS; 2) RPE "Almaz" Roman Torgashov, 1) Saratov Branch, V.A. Kotel’nikov Institute of Radio Engineering and Electronics RAS; 2) Saratov State University Nikita Ryskin, 1) Saratov Branch, V.A. Kotel’nikov Institute of Radio Engineering and Electronics RAS; 2) Saratov State University

Internet Report

1. Reconfigurable Broadband Terahertz Perfect Absorbers and Generators Based on Multilayer Graphene Ribbon Plasmonic Structures
   Lerer A.M.1, Makeeva G.S.2, Cherepanov V.V.1, Ivanova I.N.1 1 Southern Federal University lerer@sfedu.ru, vcherepanov@sfedu.ru, ivanovairina@sfedu.ru 2 Penza State University radiotech@pnzgu.ru

Poster

1. FRACTAL RECTENNA FOR RADIO FREQUENCY ENERGY COLLECTION IN WI-FI RANGE
   A.V. Smirnov, I.A. Gorbachev, A.V. Gorbunova, V.V. Kolesov, I.E. Kuznetsova Kotel'nikov institute of Radio Engineering and Electronics of RAS, Moscow, Russia andre-smirnov-v@yandex.ru
2. A flexible CPW-fed antenna for ISM and cellular bands fabricated by laser ablation
   Starodubov A.V., Saratov State University Ozhogin I.S., Saratov State University Kozhevnikov I.O., Saratov State University Serdobintsev A.A., Saratov State University
3. The effect of the external magnetic field on the higher harmonics formation in the output power spectrum of low-voltage vircator with nonlaminar electron beams
   Andrei Starodubov, Saratov State University Nikolay Kuznetsov, Saratov State University Viktor Galushka, Saratov State University Anton Pavlov, Saratov State University Yurii Kalinin, Saratov State University
4. The effect of the external magnetic field on the higher harmonics formation in the output power spectrum of low-voltage vircator with nonlaminar electron beams
   Andrei Starodubov, Saratov State University Nikolay Kuznetsov, Saratov State University Viktor Galushka, Saratov State University Anton Pavlov, Saratov State University Yurii Kalinin, Saratov State University
5. Peculiarities of microfabrication the slow-wave structure for millimeter-band backward-wave oscillator based on the pseudospark-sourced electron gun
   Anton Pavlov, Saratov State University Viktor Galushka, Saratov State University Andrey Starodubov, Saratov State University Roman Torgashov, Saratov State University Nikita Ryskin, Saratov State University
6. Research of oscillator transducer's oscillation system
   Levitskiy S. G, SSU Adrianov V. G, SSU

Internet Poster

1. Analysis of the effect of heating a container for chemical-thermal treatment of titanium in a carbon-containing environment, depending on the geometry and current strength of the inductor
   Voyko Aleksey Vladimirovich - Yuri Gagarin State Technical University of Saratov
2. Numerical simulation of induction PVD of titanium on steel plates
   Fomin Aleksander Aleksandrovich - Yuri Gagarin State Technical University of Saratov, Russia
3. Influence of induction chemical-thermal treatment on the mechanical properties of high-speed steel grade HSS
   Kabanov Dmitry Sergeevich - Yuri Gagarin State Technical University of Saratov Voyko Aleksey Vladimirovich - Yuri Gagarin State Technical University of Saratov
4. Carburizing the surface of tantalum in a sealed container using an induction machine
   Voyko Aleksey Vladimirovich - Yuri Gagarin State Technical University of Saratov; Kabanov Dmitry Sergeevich - Yuri Gagarin State Technical University of Saratov.
5. Influence of induction treatment on the steel-titanium layered structure for the formation of a highly hard working titanium-oxide surface
   Aleksandr A. Fomin Andrey Yu. Shelkunov
6. Investigation of changes in the electrical parameters of induction heating of commercial titanium in the high-temperature range
   Shchelkunov Andrey, Egorov Ivan Svyatoslavovich, Fomin Aleksandr Aleksandrovich, Yuri Gagarin State Technical University of Saratov
7. Influence of induction chemical-thermal treatment in a gaseous medium on the formation of a wear-resistant gradient nitride layer on tool steel
   Palkanov Pavel Alekseevich - Yuri Gagarin State Technical University of Saratov, Russia Fomin Aleksander Aleksandrovich - Yuri Gagarin State Technical University of Saratov, Russia